Using and Programming Generics in J2SE 5.0

ihuashao

浏览: 4534061 次
性别:
来自: 济南

最近访客更多访客>>

morelily

cyj1988jyc

u012363178

bcrun

博主相关

博客

微博

相册

留言

关于我

文章分类

社区版块

存档分类

J2SE C C++C#JVM

Article

Using and Programming Generics in J2SE 5.0

By Qusay H. Mahmoud, October 2004

In J2SE 1.4.x you can have a collection of objects where the elements may have any reference type. Some additional work, however, is still your responsibility in the sense that you are required to keep track of what types of objects your collections contain. Also, you cannot have collections of primitive data types such as ints, floats, doubles, etc. But since every data type has a corresponding reference type (for example, int has Integer), you can convert an int to an Integer before storing it in the collection. However, when an element is extracted from the collection an Object is returned that must be cast to an Integer in order to ensure type safety. All this makes Java programs unnecessarily hard to read and maintain, and are more likely to fail with runtime errors.

If a collection contains information about the element type, there would be no need to keep track of what collections you have and also there would be no need for casting. This would make programs easier to read and maintain, and less likely to fail at runtime. J2SE 5.0 has added a new core language feature known as generics (also known as parameterized types), that provides compile-time type safety for collections and eliminate the drudgery of casting. The effort of adding generics to Java is led by Sun Microsystems as JSR 14 under the Java Community Process (JCP).

Generics are one of the most frequently requested language extensions to Java, and they have been finally added in J2SE 5.0. This article provides an introduction to programming with generics.

The Need for Generics

The motivation for adding generics to the Java programming language stems from the fact that a collection doesn't contain information about the element type, the need to keep track of what type of elements collections contain, and the need for casts all over the place. Using generics, a collection is no longer treated as a list of Object references, but you would be able to differentiate between a collection of references to Integers and collection of references to Bytes. A collection with a generic type has a type parameter that specifies the element type to be stored in the collection.

As an example, consider the following segment of code that creates a linked list and adds an element to the list:

LinkedList list = new LinkedList();
list.add(new Integer(1));
Integer num = (Integer) list.get(0);

As you can see, when an element is extracted from the list it must be cast. The casting is safe as it will be checked at runtime, but if you cast to a type that is different from, and not a supertype of, the extracted type then a runtime exception, ClassCastException will be thrown.

Using generic types, the previous segment of code can be written as follows:

LinkedList<Integer> list = new LinkedList<Integer>();
list.add(new Integer(1));
Integer num = list.get(0);

Here we say that LinkedList is a generic class that takes a type parameter, Integer in this case.

As you can see, you no longer need to cast to an Integer since the get() method would return a reference to an object of a specific type (Integer in this case). If you were to assign an extracted element to a different type, the error would be at compile-time instead of run-time. This early static checking increases the type safety of the Java language.

To reduce the clutter, the above example can be rewritten as follows...using autoboxing:

LinkedList<Integer> list = new LinkedList<Integer>();
list.add(1);
int num = list.get(0);

As a complete example, consider the following class, Ex1, which creates a collection of two Strings and one Integer, and then prints out the collection:

Ex1.java

import java.util.*;

public class Ex1 {

  private void testCollection() {
    List list = new ArrayList();
    list.add(new String("Hello world!"));
    list.add(new String("Good bye!"));
    list.add(new Integer(95));
    printCollection(list);
  }

  private void printCollection(Collection c) {
    Iterator i = c.iterator();
    while(i.hasNext()) {
      String item = (String) i.next();
      System.out.println("Item: "+item);
    }
  }

  public static void main(String argv[]) {
    Ex1 e = new Ex1();
    e.testCollection();
  }
}

Again, an explicit cast is required in the printCollection method. This class compiles fine, but throws a CLassCastException at runtime as it attempts to cast an Integer to a String:

Item: Hello world!
Item: Good bye!
Exception in thread "main" java.lang.ClassCastException: java.lang.Integer
        at Ex1.printCollection(Ex1.java:16)
        at Ex1.testCollection(Ex1.java:10)
        at Ex1.main(Ex1.java:23)

Using Generics

Using generics, the Ex1 class above can be written as follows:

Ex2.java

import java.util.*;

public class Ex2 {

  private void testCollection() {
    List<String> list = new ArrayList<String>();
    list.add(new String("Hello world!"));
    list.add(new String("Good bye!"));
    list.add(new Integer(95));
    printCollection(list);
  }

  private void printCollection(Collection c) {
    Iterator<String> i = c.iterator();
    while(i.hasNext()) {
      System.out.println("Item: "+i.next());
    }
  }

  public static void main(String argv[]) {
    Ex2 e = new Ex2();
    e.testCollection();
  }
}

Now, if you try to compile this code, a compile-time error will be produced informing you that you cannot add an Integer to a collection of Strings. Therefore, generics enable more compile-time type checking and therefore mismatch errors are caught at compile-time rather than at run-time.

You may have already noticed the new syntax used to create an instance of ArrayList (List<String> list = new ArrayList<String>()). ArrayList is now a parameterized type. A parameterized type consists of a class or interface name E and a parameter section <T1, T2, ..., Tn>, which must match the number of declared parameters of E, and each actual parameter must be a subtype of the formal parameter's bound types. The following segment of code shows parts of the new class definition for ArrayList:

public class ArrayList<E> extends AbstractList<E> implements List<E>, 
    RandomAccess, Cloneable, Serializable {
   // ...
}

Here E is a type variable, which is an unqualified identifier. It simply acts as a placeholder for a type to be defined when the list is used.

Implementing Generic Types

In addition to using generic types, you can implement your own. A generic type has one or more type parameters. Here is an example with only one type parameter called E. A parameterized type must be a reference type, and therefore primitive types are not allowed to be parameterized types.

interface List<E> {
   void add(E x);
   Iterator<E> iterator();
}

interface Iterator<E> {
   E next();
   boolean hasNext();
}


class LinkedList<E> implements List<E> {
   // implementation   
}

Here, E represents the type of elements contained in the collection. Think of E as a placeholder that will be replaced by a concrete type. For example, if you write LinkedList<String> then E will be replaced by String.

In some of your code you may need to invoke methods of the element type, such as Object's hashCode() and equals(). Here is an example that takes two type parameters:

class HashMap<K, V> extends AbstractMap<K, V> implements Map<K, V> {

   // ...

   public V get(Object k) {
      ...
      int hash = k.hashCode();  
      ...
   }
   // ...   
}

The important thing to note is that you are required to replace the type variables K and V by concrete types that are subtypes of Object.

Generic Methods

Genericity is not limited to classes and interfaces, you can define generic methods. Static methods, nonstatic methods, and constructors can all be parameterized in almost the same way as for classes and interfaces, but the syntax is a bit different. Generic methods are also invoked in the same way as non-generic methods.

Before we see an example of a generics method, consider the following segment of code that prints out all the elements in a collection:

public void printCollection(Collection c) {
   Iterator i = c.iterator();
   for(int k = 0;k<c.size();k++) {
     System.out.printn(i.next());
   }
}

Using generics, this can be re-written as follows. Note that the Collection<?> is the collection of an unknown type.

void printCollection(Collection<?> c) {
   for(Object o:c) {
      System.out.println(e);
   }
}

This example uses a feature of generics known as wildcards.

Wildcards

There are three types of wildcards:

"? extends Type": Denotes a family of subtypes of type Type. This is the most useful wildcard
"? super Type": Denotes a family of supertypes of type Type
"?": Denotes the set of all types or any

As an example of using wildcards, consider a draw() method that should be capable of drawing any shape such as circle, rectangle, and triangle. The implementation may look something like this. Here Shape is an abstract class with three subclasses: Circle, Rectangle, and Triangle.

public void draw(List<Shape> shape) {
  for(Shape s: shape) {
    s.draw(this);
  }
}

It is worth noting that the draw() method can only be called on lists of Shape and cannot be called on a list of Circle, Rectangle, and Triangle for example. In order to have the method accept any kind of shape, it should be written as follows:

public void draw(List<? extends Shape> shape) {
   // rest of the code is the same
}

Here is another example of a generics method that uses wildcards to sort a list into ascending order. Basically, all elements in the list must implement the Comparable interface.

public static <T extends Comparable<? super T>> void sort(List<T> list) {
   Object a[] = list.toArray();
   Arrays.sort(a);
   ListIterator<T> i = list.listIterator();
   for(int j=0; j<a.length; j++) {
      i.index();
      i.set((t)a[j]);
   }
}

Changes to the Java Specification, JVM, and APIs

In order to support generic types, some modifications are necessary to the Java programming language, the Java virtual machine¹, and the Java APIs. The notable changes to the Java APIs are related to the Collection hierarchy in the java.util package, changes to the java.lang.Class class, and the java.lang.reflect package so that it is possible to examine a type, method, constructor or field declaration and obtain generic type information. If you like to learn about the exact changes, please see JSR 14: Adding Generics to the Java Programming Language.

Behind the Scenes

Generics are implemented by the Java compiler as a front-end conversion called erasure, which is the process of translating or rewriting code that uses generics into non-generic code (that is, maps the new syntax to the current JVM specification). In other words, this conversion erases all generic type information; all information between angle brackets is erased. For example, LinkedList<Integer> will become LinkedList. Uses of other type variables are replaced by the upper bound of the type variable (for example, Object), and when the resulting code is not type correct, a cast to the appropriate type is inserted.

Java Generics vs. C++ Templates

While generics look like the C++ templates, it is important to note that they are not the same. Generics simply provide compile-time type safety and eliminate the need for casts. The main difference is encapsulation: errors are flagged where they occur and not later at some use site, and source code is not exposed to clients. Generics use a technique known as type erasure as described above, and the compiler keeps track of the generics internally, and all instances use the same class file at compile/run time.

A C++ template on the other hand is just a fancy macro processor; whenever a template class is instantiated with a new class, the entire code for the class is reproduced and recompiled for the new class.

Conclusion

Generics are a new core feature in J2SE 5.0, and a major addition to the core language. This feature provides a useful abstract and compile-time type safety for collections and eliminates the drudgery of casting. This article provided an overview and introduction to Java generics, and showed how to use generics as well as write your own. The examples provided in this article demonstrate how useful this new core feature is.

For More Information

- Download J2SE 5.0
- GJ: Extending the Java programming language with type parameters
- JSR 14: Adding Generics to the Java Programming Language
- Generics Tutorial (Generics in the Java Programming Language)

Acknowledgments

Thanks to Gilad Bracha for commenting on earlier drafts, and for providing some of the examples used in this article.